Sony CDX-GT57UP Handbuch
18
*1 Hidden when “SET POSITION” is set to
“OFF.”
*2 When the audio output is set to “SUB-OUT”
*3 When AUX source is activated (page 21).
Enjoying sophisticated sound
functions — Advanced Sound Engine
functions — Advanced Sound Engine
Advanced Sound Engine creates an ideal in-
car sound field with digital signal
processing.
car sound field with digital signal
processing.
Selecting the sound quality
— EQ7 Preset
— EQ7 Preset
You can select an equalizer curve from 7
equalizer curves (XPLOD, VOCAL, EDGE,
CRUISE, SPACE, GRAVITY, CUSTOM or
OFF).
equalizer curves (XPLOD, VOCAL, EDGE,
CRUISE, SPACE, GRAVITY, CUSTOM or
OFF).
1
During reception/playback, press the
select button.
select button.
2
Rotate the control dial until “EQ7
PRESET” appears, then press it.
PRESET” appears, then press it.
3
Rotate the control dial until the desired
equalizer curve appears, then press it.
equalizer curve appears, then press it.
4
Press
(BACK).
To cancel the equalizer curve, select “OFF”
in step 3.
in step 3.
Tip
The equalizer curve setting can be memorized for
each source.
each source.
Customizing the equalizer
curve — EQ7 Setting
curve — EQ7 Setting
“CUSTOM” of EQ7 allows you to make
your own equalizer settings.
your own equalizer settings.
1
Select a source, then press the select
button.
button.
2
Rotate the control dial until “EQ7
SETTING” appears, then press it.
SETTING” appears, then press it.
3
Rotate the control dial until “BASE”
appears, then press it.
You can select an equalizer curve as a
basis for further customizing.
appears, then press it.
You can select an equalizer curve as a
basis for further customizing.
4
Rotate the control dial to select the
equalizer curve, then press it.
equalizer curve, then press it.
5
Setting the equalizer curve.
Rotate the control dial to select the
frequency range, then press it.
BAND1: 63 Hz
BAND2: 160 Hz
BAND3: 400 Hz
BAND4: 1 kHz
BAND5: 2.5 kHz
BAND6: 6.3 kHz
BAND7: 16.0 kHz
BAND2: 160 Hz
BAND3: 400 Hz
BAND4: 1 kHz
BAND5: 2.5 kHz
BAND6: 6.3 kHz
BAND7: 16.0 kHz
Rotate the control dial to adjust the
volume level, then press it.
The volume level is adjustable in 1 dB
steps, from -6 dB to +6 dB.
The volume level is adjustable in 1 dB
steps, from -6 dB to +6 dB.
Repeat steps
and to adjust other
frequency ranges.
6
Press
(BACK) twice.
The equalizer curve is stored in
“CUSTOM.”
“CUSTOM.”
SW LEVEL
*
2
(Subwoofer Level)
Adjusts the subwoofer volume level:
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)
AUX VOL
*
3
(AUX Volume level)
Adjusts the volume level for each
connected auxiliary equipment: “+18
dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.
connected auxiliary equipment: “+18
dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.