Sony CDX-L490B Benutzerhandbuch
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
17
Error displays/Messages
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
situation, consult your nearest Sony dealer.
Radio reception
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
The stations cannot be received.
The sound is hampered by noises.
The sound is hampered by noises.
• Connect a power aerial control lead (blue) or
accessory power supply lead (red) to the
power supply lead of a car’s aerial booster.
(Only when your car has built-in FM/AM
aerial in the rear/side glass.)
power supply lead of a car’s aerial booster.
(Only when your car has built-in FM/AM
aerial in the rear/side glass.)
• Check the connection of the car aerial.
• The auto aerial will not go up.
• The auto aerial will not go up.
t Check the connection of the power aerial
control lead.
• Check the frequency.
Automatic tuning is not possible.
• The local seek mode is set to “ON.”
t Set the local seek mode to “OFF” (page
• The broadcast signal is too weak.
t Perform manual tuning.
The “ST” indication flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
t Set the monaural reception mode to
“ON” (page 11).
A programme broadcast in stereo is heard
in monaural.
in monaural.
The unit is in monaural reception mode.
t Cancel monaural reception mode (page
t Cancel monaural reception mode (page
11).
Error displays
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
seconds, and an alarm sound will be heard.
Err04
A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.
t Clean or insert the CD correctly.
Err99
The CD unit cannot be operated because of
some problem.
t Press the RESET button on the unit.
some problem.
t Press the RESET button on the unit.
Messages
“
” or “
”
You have reached the beginning or the end of
the disc and you cannot go any further.
the disc and you cannot go any further.