Alpine 68-16909Z79-A Benutzerhandbuch

01GB04CDE121.fm

ALPINE CDE-121 68-16909Z79-A (EN)

• Abnormal current is run to the USB port (an error 

message may be displayed if the USB device that is not 
compatible with the unit is connected).
Flash memory malfunction.
- Connect another flash memory.

• A USB device that is not supported by the unit is 

connected.
- Connect a USB device that is supported by the unit.

• Flash memory is not connected or not recognized.

- Make sure the flash memory device is correctly 

connected and the cable is not excessively bent.

• No song (file) is stored in the flash memory.

- Connect the flash memory device after storing songs 

(files).

• A sampling rate/bit rate not supported by the unit is used.

- Use a sampling rate/bit rate that is supported by the 

unit.

• A copy-protected WMA file was played back.

- You can only play back non-copy-protected files. 

• Text information that is not recognizable by the unit has 

been input.
- Use a flash memory device with input text information 

that is supported by the unit.

• The iPod/iPhone is not connected or not recognized.

- Make sure the iPod/iPhone is correctly connected 

(refer to “Connections” on page 28).
Make sure the cable is not bent excessively.

• There are no songs in the iPod/iPhone.

- Download songs to the iPod/iPhone and connect to this 

unit.

• Communication error.

- Reset the iPod.
- Check the display by reconnecting between the iPod/

iPhone and this unit, using the iPod/iPhone cable.

• Caused by the iPod/iPhone Software Version not being 

compatible with this unit.
- Update the iPod/iPhone Software Version to be 

compatible with this unit.

• The iPod/iPhone is not verified.

- Reset the iPod.
- Try another iPod/iPhone, if available.

• Power surge error.

- Excessive voltage/current is supplied to the iPod/

iPhone.

- Try another iPod/iPhone, if available.
- Turn the ignition key off, and then set to ON again.

01GB00CDE121.book  Page 24  Monday, December 13, 2010  2:03 PM