Classe Audio SSP-800 Benutzerhandbuch

13

MENU

SSP-800

MUTE

1

2

5

6

4

3

Th

  e front panel of the SSP-800 is shown above. Th

  e numbers in the drawing 

refer to the descriptions that follow.

Pressing the Standby button puts the SSP-800 into standby mode – a 
low-power state which leaves the Surround Sound Processor and outputs 
inactive but still allows the processor to respond to system commands via 
any of the supported control protocols (IR input, CAN-Bus, RS-232, or 
triggers).

If the processor is already in Standby mode, pressing the Standby button 
fully powers up the SSP-800.

•  LED On – the SSP-800 is in Standby mode, or the display has 

timed out due to a display setting.

• LED fl ashes (at power-up) – the SSP-800 is in the process of 

power-up initialization.

•  LED Off  – the SSP-800 is powered on, fully operational, and the 

display active.

• LED fl ashes rapidly (after power-up) – the AC mains voltage is 

out of range.

Press once to call up the main page of the menu system, which replaces the 
normal front page or Home page of the Touchscreen and OSD (On-Screen 
Display). Press the Menu button again to revert to the Home page.

Th

  e menu system gives you control over operational details including: 

system setup options, various display options (including the language 
used by the menu system), and custom installation capabilities so that the 
SSP-800 integrates smoothly into the most complex systems. For more 
information, see Th

  e Menu System later in this manual.