Sony WRR-855A Benutzerhandbuch

9

 

(GB)

Take the following precautions to prevent interference and
noise.
• Do not simultaneously use two or more microphones and

transmitters that are set to the same channel.

• When using two or more tuners simultaneously, always set

the tuners that use the same groups (other than group 00) to
different channels in that group.

• The reception antennas and transmitter should be used at

least 3 meters away from each other.

Turn the POWER switch ON.
On the WRR-855A, the “HELLO” message appears on
the display, then it changes to the tuner status indication
shown before the tuner was previously turned off.
On the WRR-855B, the version number of your tuner (for
example “U66”) appears, then it changes to the tuner
status indication shown before the tuner was previously
turned off.

POWER switch operation should be performed after
disconnecting the input from connected equipment, as
noise will be heard if the switch is turned ON or OFF
beforehand.

Press and hold the GP button down for more than one
second.
The tuner goes to the group selection mode and the group
number flashes.

Press the + or – button to select the group.
Pressing the + button cyclically changes the groups in

UHF SYNTHESIZED

TUNER UNIT WRR-855

ON

OFF

MUTING

POWER

CH

GP

–

+

GP/CH

RF

AF

S

Group
selection mode