Sharp LC-60LE650LX Benutzerhandbuch

Protection against overturning

There is a danger of the product overturning in the case
of a disaster or sudden collision. Carry out the following
tip-resistant measurement for your safety.

Anchoring the TV to the wall or a pillar

Affix the TV to the wall or a pillar using extra strong
ties and cup hooks.



Cup hook (commercially available)



Tie (commercially available)

Fixing the TV to the table

Place the TV on the table.

Pull the attached restraining bracket out so that it
is at a 90 degrees angle.

Insert commercially available screws in the holes
of the restraining bracket and tighten the screws
to secure the TV to the table.

• Use commercially available screws to firmly secure the

TV.

Stand



Screw (commercially available)



Restraining bracket (attached)

CAUTION

• As this product is heavy, use a table that is wide

enough to support the product and capable of
withstanding the product’s weight. The table should be
set where it will not be overturned.

• Be sure to use at least two people when moving the TV.

Removing the stand

For wall mounting with the bracket remove the stand.

Before setting TV on the wall

• Remove the connected cables (DVD, VCR, etc) from the

terminals.

• Detach the four caps at the 4 locations on the rear of the TV.

Unfasten the screws at the 4 locations on the rear
of the stand.

Detach the stand from the TV (hold the stand so it
will not drop from the edge of the base area).

NOTE

• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.

LC60LE650X_EN_book.indb 31

7/18/2013 8:52:24 AM