Sony 52EX700 Benutzerhandbuch

Seite von 42
KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 24
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
SERVICE ADJUSTMENTS
2-2.  ADJUSTMENTS AFTER REPLACING THE BAL BOARD 
OR LCD PANEL
The following procedures must be completed after replacing the BAL 
Board or the LCD panel.  
 
Update the TV to the latest software version
 
Select the Model
 
Select the Destination
 
Verify model and panel information are correct
 
Reconnect all cables
2-2-1.  UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the 
software to the latest version.  
Before you begin
 
Disconnect all cables (RF, External input, Ethernet, etc.) 
 from 
the 
TV
Instructions for updating the software are included with the software 
package.  After completing the software update, proceed to “Selecting 
the Model”.
2-2-2.  SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set 
the Model data value. 
1.  TV must be in standby mode. (Power off).
2.  Access Service Mode.
 
Press the following buttons on the Remote Commander 
within a second of each other: 
DISPLAY
 
 Channel 
5
 
 Volume 
+
 
 
POWER
3. Display 
the 
DIGITAL Service Menu
 
NOTE:  There are 3 Service Menus for this model, DIGITAL, 
CHASSIS, and SUB. If the DIGITAL Service Menu is 
not displayed, press JUMP  or OPTIONS  on the Remote 
Commander.
DIGITAL
SERVICE
001 OP
000 VERS   
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
4. Press 
2
 to move to the 002 MODEL (Next) category.