Sony 52EX700 Benutzerhandbuch

Seite von 42
KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 29
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
SERVICE ADJUSTMENTS
2-4.  RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments 
and Channel Memory settings to the preset factory conditions.
1.  While holding down the   on the Remote Commander, 
press the POWER button on the TV Switch Unit of the set.
 
The set restarts and displays the Initial Setup screen. This 
may take several minutes.
2-4-1.  RESETTING THE TV TO FACTORY CONDITION USING 
SERVICE MODE
1.  TV must be in Standby Mode. (POWER off).
2.  Press the following buttons on the Remote Commander 
within a second of each other: 
DISPLAY
 
 Channel 
5
 
 Volume 
+
 
 
POWER
.
3.  If necessary, press JUMP  or OPTIONS  to go to DIGITAL 
mode.
4. Press 
8
.
 
“SERVICE” changes to green RST. 
5. Press 
MUTING .
 
RST executes the command and displays EXE.
6. Press 
0
 .
 
EXE-RST displays green, then red indicating the TV is 
writing the data.
7.   When the process is complete the green SERVICE text 
displays and the LED display as shown below: 
TIMER
Standby
POWER
TIMER
Standby
POWER
8.    Cycle AC Power (Unplug and Plug AC Cord from the 
AC Outlet). 
9.  The set restarts and displays the Initial Setup screen. 
This may take several minutes.