Dayton DA30 Benutzerhandbuch

(3)

The DA30 can be permanently mounted to a desk, shelf, or wall using the provided brackets. Use the 1/4" long machine screws to 
connect the brackets to the case. Use the 9/16" long wood screws to attach the amplifier and brackets to a wood desk or shelf. If 
mounting to a desktop, first remove the feet from the bottom of the amplifier and discard.

●

 Power: 2 X 15 W (RL = 4 Ohms), 1 X 30 W (RL = 8 Ohms)

●

 Efficiency: 92%

●

 Total Harmonic Distortion: 0.015% typical

●

  Class D Topology

●

 Input Impedance: 100K Ohms

●

 Auto-On Sensitivity: <0.8V

●

 Stand-by Current: 0.6mA

●

 Operating Current, No-Load: 40mA typical, 80mA max

●

 Power Supply: 24 VDC, 2000mA

●

 Dimensions: 1-5/8" (H) x 4-7/16" (W) x 5-1/2" (D)

If the DA30 does not turn on with a source connected and playing try these troubleshooting tips:

●

 Does the source device have a 3.5mm output (such as a PC or laptop)? Connect headphones to the headphone jack and  

  check for an output signal.

●

 Does the source device have RCA line output (such as a DVD player)? Connect a known working amplifier and speakers to the  

  line outputs to check for a signal. Refer to the DVD player manual to switch output to L&R stereo line level if necessary.

●

 Check the power switch, when depressed the DA30 is in “auto-on” mode and the power indicator should be lit.

●

 Check the power supply; verify it is plugged into a working receptacle and is firmly plugged into the 24 VDC power jack.