Interfire Audio D900.1 Benutzerhandbuch

8

1

2

3

4

5

6

7

1.  RCA Input Jacks            2.  Input Level Control        3.  Low Pass Frequency
4.  Bass Boost  
5.  Remote Control Jack   6.  Master/Slave Switch       7.  Slave Input Jack

REMOCON

GAIN

L.P.F

BASS

BOOST

50Hz 250Hz

L

R

LINE INPUT

SLAVE

6V

0.2V

MASTER

SLAVE

0dB 12dB

1.  RCA Input Jacks - Low level-high impedance inputs. Use high quality RCA cables designed

     for mobile applications. 

2.  Input Level Control - Adjust the input level for the marked channels. Turn clockwise to 

     increase the level, counterclockwise to decrease. Amplifiers will run cooler and produce 

     less system noise at lower level settings.

3.  Low Pass Frequency - Adjust the crossover frequency by turning clockwise to set to a higher 

     frequency, counterclockwise to set to a lower frequency.

4.  Bass Boost - Adjust the sub boost level of the selected frequency output from 0dB to 12dB.

5.  Remote Control Jack - For connecting the remote control module to the amplifier. 

6.  Master/Slave Switch - Select the remote level control or the on-board level control as the 

     master control.

7.  Slave Input Jack - Used to connect to another amplifier when bridging 2 amps together.  

     The  Slave  mode bypasses normal  input jacks and controls.