Behringer SX3282 Benutzerhandbuch
5
EURODESK SX3282 User Manual
1. Introduction
1.1 The manual
◊
Reading this manual will make you aware of the many possibilities the
SX3282 offers you. Please keep this manual safely for future reference.
SX3282 offers you. Please keep this manual safely for future reference.
1.1.1 Nomenclature
Most specialist subjects are not really all that difficult provided you understand
Most specialist subjects are not really all that difficult provided you understand
the language used, and the vocabulary of mixing is pretty straight-forward.
Nevertheless it is as well to be clear about what certain terms mean. A “slot” in a
recorder will always be referred to as a track, while that in a mixer will invariably
be a channel. A group will always refer to a sub-mix of channels. Similarly the
term band will be mentioned only in conjunction with frequency.
1.2 Before you get started
1.2.1 Shipment
Your product was carefully packed at the factory to ensure safe transport.
Your product was carefully packed at the factory to ensure safe transport.
Nevertheless, if the box is damaged inspect the unit immediately for
signs of damage.
◊
If the unit is damaged please do NOT return it to us, but notify your
dealer and the shipping company immediately; otherwise, claims for
damage or replacement may not be granted.
dealer and the shipping company immediately; otherwise, claims for
damage or replacement may not be granted.
◊
We recommend that you use a flight case to give the unit optimum
protection during use or transport.
protection during use or transport.
◊
Always use the original box to prevent damage during
storage or transport.
storage or transport.
◊
Make sure that children cannot play unsupervised with the
unit or its packaging.
unit or its packaging.
◊
Please ensure proper disposal of all packing materials.
1.2.2 Initial operation
Ensure adequate air supply and to avoid overheating do not place the unit
Ensure adequate air supply and to avoid overheating do not place the unit
near radiators etc.
!
!
Caution
◊
Before you change the fuse, switch off the device and pull the plug to
avoid electric shock or damage to the device.
avoid electric shock or damage to the device.
◊
Blown fuses must be replaced by fuses of the correct rating!
Please refer to the “Specifications” section for the applicable rating.
Please refer to the “Specifications” section for the applicable rating.
For connection to the mains use the enclosed power cord with cold connector
which complies with the relevant safety regulations.
◊
Please make sure that all devices are properly grounded. For your own
safety, never remove or disable the ground conductors from the devices
or on the power cords. The unit must always be connected to the mains
outlet with a protective grounding connection.
safety, never remove or disable the ground conductors from the devices
or on the power cords. The unit must always be connected to the mains
outlet with a protective grounding connection.
Important notes concerning installation
◊
The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
1.2.3 Online Registration
Please register your new BEHRINGER equipment right after your purchase
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in
the original equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please contact the
distributor nearest you. A list of distributors can be found in the support area of
our website (http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!