Motorola DSR-6400 Benutzerhandbuch
DSR-6400 Series
101
Mechanical
Dimensions 24.9” x 19” x 1.75”
IRD without packing
30” x 21” x 6.7”
IRD with packing
DSR-6401 Weight
19.8 lbs. [9 kg maximum]
Finished goods with packaging and accessory)
16.3 lbs. [7.4 kg maximum]
Finished goods without packaging
DSR-6402 Weight
20.85 lbs. [9.5 kg maximum]
Finished goods with packaging and accessory)
17.35 lbs. [7.9 kg maximum]
Finished goods without packaging
DSR-6403 Weight
21.65 lbs. [9.8 kg maximum]
Finished goods with packaging and accessory)
18.15 lbs. [8.2 kg maximum]
Finished goods without packaging
DSR-6404 Weight
22.36 lbs. [10.14 kg maximum]
Finished goods with packaging and accessory)
18.86 lbs. [8.6 kg maximum]
Finished goods without packaging
Special Instructions
For restricted access locations, install the DSR-6400 Series only in restricted-access areas (dedicated equip-
ment rooms, equipment closets, or the like) in accordance with Articles 110-26, 110-27, or the NEC ANSI/
NFPA70, or per the applicable code in the country of installation.
ment rooms, equipment closets, or the like) in accordance with Articles 110-26, 110-27, or the NEC ANSI/
NFPA70, or per the applicable code in the country of installation.
Always connect the protective earthing to one the two permanently-protective Earthing Terminals on the back
panel of the DSR-6400 Series. For exact location, see Figure 2-1 on page 17.
panel of the DSR-6400 Series. For exact location, see Figure 2-1 on page 17.
CAUTION: When connecting any of the eight RF IN ports, the RF-IN Antenna cable should only be
connected while the DSR-6400 Series is properly grounded and the shield of the coaxial cable should be
earthed in accordance with Article 820.93 of the NEC, ANSI/NFPA 70:2005, or equivalent.
connected while the DSR-6400 Series is properly grounded and the shield of the coaxial cable should be
earthed in accordance with Article 820.93 of the NEC, ANSI/NFPA 70:2005, or equivalent.