Siemens CCIC1410 Benutzerhandbuch

Seite von 96
Safety 
Siemens Building Technologies
 
 
Fire Safety & Security Products 
 
05.2009
 
 
Radio interference with other devices in the environment 
z
 
In France, it is not allowed to use the CCIC1410-LAW outside buildings and on 
the channels 10 – 13. 
z
 
The unit operates on frequencies that are approved for use in the European 
Union. When used outside the EU, the national regulations for the use of 
frequencies must be observed. 
Damage due to unsuitable mounting location 
z
 
The environmental conditions recommended by the manufacturer must be 
observed.  
z
 
Do not operate the device close to sources of powerful electromagnetic 
radiation. 
z
 
Do not operate the device in dusty places. 
z
 
The device should only be used for indoor applications. 
z
 
Do not expose the device to mechanical vibrations or shocks. 
z
 
Protect the device against moisture. 
Danger of electrical shock due to incorrect connection 
z
 
Connect the device only to a limited power source. 
z
 
This device is designed to work with 5 V DC-systems. Do not connect the device 
to any other power systems. 
Risk of cable damage due to stress 
z
 
Make sure that all outgoing cables and wires are sufficiently strain-relieved. 
z
 
Make sure that cables are not under stress, kinked or damaged. 
1.2.3 
Service and maintenance 
 
z
 
Do not attempt to service or modify this device yourself. Refer this work to 
qualified service personnel. 
1.2.4 
Cleaning of the device 
 
Do not touch the imaging surface of the sensor. Use a soft cloth moistened with 
alcohol to clean the surface if it is touched accidentally. 
1.2.5 Software 
 
 
Damage during transport 
z
 
Always transport the CD in the case it originally came in. 
Data loss after software update 
z
 
Make sure to backup all data before updating the software. 
Damage due to improper handling 
z
 
Protect the CD from scratching. 
z
 
To clean the CD use a soft dry cloth.