JAI M7+ CL Benutzerhandbuch
CV-M4
+
/M4
+
CL, CV-M7
+
/M7
+
CL
9.2. Specification table
Specifications
CV-M4+/CV-M4
+
CL
CV-M7+/CV-M7
+
CL
Scanning system
Progressive 1060 lines 24 frames/sec.
Pixel clock
40.49 MHz
40.49 MHz
Line frequency
Line freq. with V binnig
Line freq. with V binnig
25.43 kHz (1592 pixel clock/line)
25.11 kHz (1752 pixel clock/line)
25.11 kHz (1752 pixel clock/line)
25.43 kHz (1592 pixel clock/line)
-
Frame rate for full frame
Frame rate for V binning
Frame rate for V binning
24 frames/sec. (1060 lines/frame)
44 frames/sec. (565 lines/frame)
24 frames/sec. (1060 lines/frame)
-
CCD sensor
2/3” progressive scan monochrome
IT CCD (ICX285AL)
2/3” progressive scan RGB primary color
(Bayer filter) IT CCD (ICX285AQ)
Sensing area
8.9 (h) x 6.6 (v) mm
Cell size
6.45 (h) x 6.45 (v) µm
Effective pixels
1392 (h) x 1040 (v)
Pixels in video output
Full
V binning
1/2 partial
1/4 partial
1/8 partial
Full
V binning
1/2 partial
1/4 partial
1/8 partial
1380 (h) x 1030 (v) 24 frames /sec.
1380 (h) x 515 (v) 44 frames/sec.
1380 (h) x 512 (v) 44 frames/sec.
1380 (h) x 256 (v) 70 frames/sec.
1380 (h) x 512 (v) 44 frames/sec.
1380 (h) x 256 (v) 70 frames/sec.
1380 (h) x 128 (v) 102 frames/sec.
1380 (h) x 1030 (v) 24 frames /sec.
-
1380 (h) x 512 (v) 44 frames/sec.
1380 (h) x 256 (v) 70 frames/sec.
1380 (h) x 256 (v) 70 frames/sec.
1380 (h) x 128 (v) 102 frames/sec.
Sensitivity on sensor
0.1 Lux (Max. gain, 50% video)
0.1 Lux (Max. gain, 50% video)
S/N ratio
>57 dB
>57 dB
Video A/D conversion
10 bit
Video output digital
8 bit in LVDS (EIA 644). 10 bit in Camera Link. (CL versions)
Video output analogue
0.7 Vpp, 75 Ω (For test only)
Gamma
1.0
Gain
Gain range
Manual
-3 to +12 dB
Synchronization
Int. X-tal. Ext. random trigger
Sync. output *)
Composite 4 Vpp from 75 Ω
Trigger input TTL *)
4 V ±2 V
EEN output *)
4 Vpp from 75 Ω
Pixel clock output
LEN output
FEN output
LEN output
FEN output
Trigger input *)
Multiple exposure *)
Multiple exposure *)
LVDS or Camera Link
LVDS or Camera Link
LVDS or Camera Link
LVDS or Camera Link
LVDS or Camera Link
TTL, LVDS or Camera Link
TTL, LVDS or Camera Link
TTL, LVDS or Camera Link
Trigger modes
Continuous, Edge pre-select, Pulse width control, Frame delay, Reset Continuous
Trigger
Trigger input (Edge pre-s)
>2 H to < 4000 H. (H synchronous H a-synchronous accumulation)
Shutter speed (fixed)
1/24, 1/50, 1/100, 1/200, 1/400, 1/800, 1/1500, 1/3000, 1/5000, 1/10,000 s
Pulse width control
2 H to ∞. (80 µsec. to ∞) <2 second is recommended
Frame-delay readout
Fixed shutter speeds. Delay ≤3 frames
Smearless readout
Edge pre-select, PWC and frame delay
Multiple exposure
Interval between exp.
Interval between exp.
≤6 fixed exposures in frame-delay readout.
Fixed shutter time + 1H (40 µsec.)
Switches on rear
Shutter, trigger, scanning, smearless, RS 232C control
Functions controlled by
RS 232C
RS 232C
Shutter, Trigger, Scanning, Readout, Trigger input, Select/polarity, LEN/FEN/EEN
polarity, Video level, Set-up level and Gain
Operating temperature
-5°C to +45°C
Humidity
20 – 80% non-condensing
Storage
-25°C to 60°C 20 to 90% non-condensing
Power
12V DC ± 10%. 3.3 W
Lens mount
C-mount
Dimensions
40 x 50 x 90 mm (HxWxD)
Weight 250g
*) Alternative inputs or outputs
- 27 -