Intel EP80579 Benutzerhandbuch

Intel

®

 EP80579 Software for Security Applications on Intel

®

 QuickAssist Technology

August 2009

PG

Order Number: 320183-004US

49

The MIL application is invoked from the command line using the following syntax:

debugmgr {command}

where 

{command}

 is one of the following:

— help 
— DebugEnable 
— DebugDisable 
— VersionDumpAll
— setHC <timeout> 
— SystemHealthCheck
— DataDump (not supported in this release) 
— SetFileName <filename> 

These commands are described in more detail in 

. 

On FreeBSD, load the debug manager using the following commands:

cd /EP805XX_release

setenv ICP_ROOT $PWD

kldload $ICP_ROOT/StagingArea/icp_debugmgmt.ko

On Linux, follow these steps:

1. Load the debug manager using the following commands: 

cd /EP805XX_release

export ICP_ROOT=$PWD

insmod $ICP_ROOT/StagingArea/icp_debugmgmt.ko

2. Create a character device /dev/mil_driver using the following steps:

a. Find the device major number associated with the character device /dev/

mil_driver using the following command: 

cat /proc/devices | grep mil_driver 

The following is a sample output from the above command:

249 /dev/mil_driver

b. Use the device major number displayed by the above command to create the 

character device using the following command:

mknod /dev/mil_driver c <device major number> 0

If we use the sample output from step 

, then the mknod command would be:

mknod /dev/mil_driver c 249 0

The debugmgr must be enabled using the option ‘DebugEnable’ before it can display 

information and must be disabled using the option ‘DebugDisable’ at the end of it.