Lucent Technologies 8.2 Benutzerhandbuch
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
671
Feature-Related System Parameters
17
Upper Bound (msec)
Specifies the upper bound of the flashhook interval. Specifies the upper bound of
the station-to-switch recall signal timing interval in milliseconds. Appears when
Flashhook Interval is
the station-to-switch recall signal timing interval in milliseconds. Appears when
Flashhook Interval is
y
.
Lower Bound (msec)
The lower bound of the station-to-switch recall signal timing interval in
milliseconds. Specifies the lower bound of the flashhook interval. Appears when
Flashhook Interval is
milliseconds. Specifies the lower bound of the flashhook interval. Appears when
Flashhook Interval is
y
.
Forward Disconnect Timer (msec)
Specify the duration of a momentary disconnect sent by the switch to an analog
station user when that user is the last party still off-hook on a call.
station user when that user is the last party still off-hook on a call.
The next three fields control the Italian DCS Protocol feature.
Italian Protocol Enabled
Apply Intercept Locally
This field appears only if Italian Protocol Enabled is
y
.
Valid entries
Usage
80
to
1250
(in
increments of 10).
A flash of 50 msec to 130 msec is always acceptable from
a 2500-type set regardless of the setting of the Upper and
Lower bounds and will be treated as the digit one.
a 2500-type set regardless of the setting of the Upper and
Lower bounds and will be treated as the digit one.
Valid entries
Usage
80
to
1250
(in
increments of 10).
Valid entries
Usage
25
to
1500
(in increments of 25).
Valid entries
Usage
y/n
Enter
y
to enable the Italian DCS feature on a systemwide
basis.
Valid entries
Usage
y/n
Enter
y
to indicate that DID/CO intercept treatment will be
applied locally instead of on the originating switch.