Lucent Technologies 8.2 Benutzerhandbuch
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
950
System Parameters OCM Call Classification
17
Tone Name
Instance
Enter the instance number of the tone. If the system identifies a tone that matches
the characteristics defined on more than one page of this screen the system applies
the tone definition from the earlier page.
the characteristics defined on more than one page of this screen the system applies
the tone definition from the earlier page.
Tone Continuous
Cadence Step
A display-only field identifying the number of each tone cadence step and
indicating whether the tone is on or off during this cadence step.
indicating whether the tone is on or off during this cadence step.
Duration Minimum
Specifies the lower limit in milliseconds (msec) of the tone duration.
Valid entries
Usage
busy
information
intercept
reorder
ringback
information
intercept
reorder
ringback
Enter the name of the tone that you are adding or
modifying. This field is required for tone definition
outside of the U.S. and Canada.
modifying. This field is required for tone definition
outside of the U.S. and Canada.
Valid entries
Usage
1
–
8
The number distinguishes tones that have the same use but
more than one definition of silence and tone-on
characteristics.
more than one definition of silence and tone-on
characteristics.
Valid entries
Usage
y
Indicates a continuous tone. If you enter
y
, you cannot enter
data in the Duration Minimum or Duration Maximum fields.
n
Indicates a non-continuous tone.
Valid entries
Usage
75
–
6375
Enter in increments of 25 msec.