Panasonic WV-NW484S Benutzerhandbuch

19

Before installing the camera, touch a metal 

case or other metallic parts with your hand 

to remove static electricity from your body.

Doing so may cause internal components 

to damage more easily or malfunction.

The camera does not have a power switch, 

so configure the power supply to the 

camera so that it can be turned on and off.

Pay attention to the following points when 

using the camera's network cable to 

connect to a network.

• Wire and install the camera so that the 

network will not be influenced by 

lightning surges, etc.

• Pan and tilt cannot be used in combina-

tion with this camera.

Screws should be tightened sufficiently in 

accordance with the materials and 

structure of the installation location. After 

tightening the screws, visually inspect them 

to make sure there is no unevenness and 

that each screw is tight.

The camera does not come with screws. 

Choose screws in accordance with the 

materials and structure of the installation 

location.

The image may fluctuate near TV or radio 

transmission antennas, or near strong 

electric or magnetic fields (e.g. motors or 

transformers). In this case, setup a special-

ized thin conduit and pass the cable 

through it.

Use a PoE-compatible (IEEE802.3af-

compliant) hub or power supply unit.