Panasonic AW-E750 Benutzerhandbuch
;
Other Set Display
1. Gamma Correction Level Setting
[Gamma: 0.35 to 0.55]
Gamma correction level can be set.
2. Knee Compensation Level Setting
[Knee Point: 88% to 98%, Dynamic]
88% to 98%:
88% to 98%:
The level of video signals subject to
knee compensation (knee point) can be set.
Dynamic:
Knee compensation level is automatically
adjusted according to the scene.
3. White Clip Level Setting
[White Clip: 95% to 110%]
The peak level of video signals to be white-clipped
can be set.
can be set.
4. Flare Correction Level Setting
[Flare R/G/B: 0 to 100]
Flare correction level can be adjusted.
❈ Flare correction level has already been adjusted
❈ Flare correction level has already been adjusted
prior to shipment from the factory.
5. Black Stretch Setting [Black Stretch: ON, OFF]
Black stretch to correct the suppression of black
portions at low luminance can be set to ON or OFF.
portions at low luminance can be set to ON or OFF.
6. Clean DNR Setting [Clean DNR: HIGH, LOW, OFF]
This enables the clean DNR effect to be selected.
7. 3D-DNR Setting [3D-DNR: OFF, Low, Mid, High]
This enables the 3D-DNR effect to be selected.
❈ When “Mid” or “High” is selected, the noise is
❈ When “Mid” or “High” is selected, the noise is
reduced but lag increases.
8. 2-dimensional Lowpass Filter Setting
[2D LPF: OFF, LOW, HIGH]
The 2D lowpass filter that reduces moire and cross
color can be set.
color can be set.
9. CCD Read Out Mode Setting
[Field/Frame: Field, Frame 1, Frame 2]
Field:
Field:
CCD storage will be by field storage.
Frame 1:
Vertical resolution increases in frame stor-
age.
Frame 2:
Vertical resolution is raised without increas-
ing residual images by frame storage and elec-
tronic shutter.
tronic shutter.
10. PC Control Access Speed Setting
[Baud Rate: 1 200bps, 2 400bps, 4 800bps, 9 600bps]
This setting is to select a communication speed in
controlling the camera from the computer.
controlling the camera from the computer.
-52-