Micon IP-220E Benutzerhandbuch
19
Chapter 4: iGuardware
3. Select new firmware file (*.bin) and,
4. Click
“Start”.
The iGuard red and yellow LED will flash alternately to indicate that firmware
upgrading is in progress. Once completed, iGuard will reboot.
upgrading is in progress. Once completed, iGuard will reboot.
NOTE:
If the downloading / upgrade process is interrupted or the data is corrupted, the
iGuard may become non-functional which is not covered by the standard warranty
iGuard may become non-functional which is not covered by the standard warranty