Micon IP-220E Benutzerhandbuch

To add a new Timer Server the administrator must first make space by deleting 
some Time Servers.    Once this is done, the add dialog box will appear as below.   
Click “Back” to return to the System Settings Page. 

 

 

Fig.47  List of Time Server 

 

“Time Zone (Relative to GMT)” 

Select the appropriate time zone for your area. Click “Apply” to save. 

 

“System Time (yyyy/mm/dd hh:mm:ss)” 

This is to manually set iGuard System Time. The format is pre-determined 
to: yyyy/mm/dd hh:mm:ss.    Click “Manual Adjust” to save any manual changes. 

 

 

Fig.48  Auto Restart setting 

“Auto Restart System Every” 

The administrator can choose to restart iGuard at certain intervals (choose 
between minutes and hours only).  This will ensure that iGuard will work 
smoothly.    Click “Apply” to save changes. 

 

“Manual Restart” 

Click “Restart Now” to restart the system immediately. 

 

 

Fig.49 LED setting 

 

“LED function” 

The administrator can enable or disable the LED (except the Power LED) on 
iGuard here.    Click “Apply” to save settings.