JVC VN-685U Benutzerhandbuch
95
Operation Page
Displays the operating status of the camera.
This page can be used during access using
AadminB or AoperatorB.
● Click [Advanced Settings] to display setting menu.
● Click [Operation]. Press the [OK] button to enable the new settings.
● Click [Operation]. Press the [OK] button to enable the new settings.
A
B
C
Click
Operation
A
Total Sending
Bitrate
Bitrate
Displays the total TCP/UDP bit rate sent by the camera as well as the
individual bit rates.
individual bit rates.
B
Destination
Displays the destination that the camera is sending data to.
Log
C
System Log
Displays the following information.
● Number of seconds after startup
● Alarm information
● Alarm information