Canon VB101 Benutzerhandbuch

Setup Procedures

Administration Account
The same settings can be specified on the 
Basic Settings settings page.

"Administrator ID"
Sets the ID used by the administrator. Up 
to 15 characters can be set consisting of 
alphanumeric characters, underscores 
and hyphens. The default setting is "root".
 
"Password"
Sets the password. Up to 15 ASCII 
characters can be used (spaces or printable 
characters). The default setting is "VB101".
 
"Confirm Password"
Confirms the password in the field above.

Settings Web Page URL 
Sets the "path" component for the settings 
title page. This URL is used subsequently 
when you access the settings title page after 
restarting the system. (Up to 31 characters 
can be set consisting of alphanumeric 
characters, underscores and hyphens.).
The default setting is "admin".

"Time difference with Greenwich Mean Time"
The factory default time difference setting is 
set to +9 hours from Greenwich Mean Time. 
Please change this setting as needed.

You can only change the time on the VB101 
when the "Set the clock to the following time" 
option is ticked. Because this setting is returned 
to the VB101 when the "Send Config. and Reboot 
VB101" button is clicked, the values for the 
settings from year to second must be matched to 
the time when the button is clicked.

"Device Name"
Sets the device name (nickname). The device name 
is used for log mail etc.

Click the [OK] button to change the settings. To discard the changes, click the

[Cancel] button. This returns you to the settings title page.

Use this page to set the administrator ID and password as well as the date and time.

● For system security reasons, we recommend that you change the

→ P.162) so that you do not forget them.

● If you forget the administrator ID and password, you will have to return the

c