Bosch AN Benutzerhandbuch

FLEXIDOME 5000 AN

Connection and set-up | en

Bosch Security Systems

Installation Manual

AM18-Q0648 | v1.0 | 2013.03

The physical default position of the camera is that the top of 

the image corresponds to the indication TOP. 

The camera module position can be adjusted along three axes. 

When adjusting the camera position, ensure that the picture 

display on the monitor is level. Set the camera to the desired 

position by performing the following steps:

–

For horizontal adjustment along the pan axis (A), rotate the 

camera module in the base. Do not rotate more than 360°.

–

To obtain a horizontal horizon (for tilted ceilings or 

sidewall mounting), rotate the base of the lens along the 

twist axis (C) to align the picture shown on the monitor. 

Do not rotate more than 340°.

–

For vertical adjustment along the tilt axis (B), loosen 

thumbwheels, position camera, then gently tighten 

thumbwheels to secure camera. Do not rotate more than 

90°.

Five keys, located on the side panel, are used for navigating 

through the menu system.

3.

Thumbwheels

4.

Navigation buttons (5)

5.

Focal length

6.

Focus

A.

Pan-axis rotation

B.

Tilt-axis rotation 

C.

Twist-axis rotation

CCD image sensors are highly sensitive and require special care 

for proper performance and extended lifetime. Do not expose 

them to direct sunlight or bright spotlights in operating and 

non-operating conditions. Avoid bright lights in the field of view 

of the camera.