Bosch NBN-832 Benutzerhandbuch

DinionHD 1080p IP Camera

Troubleshooting | en

Bosch Security Systems

Installation Manual

AM18-Q0600 | v1.0 | 2011.07

No audio 

transmission to 

remote station.

Hardware fault.

Check that all connected 

audio units are operating 

correctly.

Faulty cable connections. Check all cables, plugs, 

contacts and 

connections.

Incorrect configuration.

Check audio parameters 

on the Audio 

configuration and 

LIVEPAGE Functions 

pages.

The audio voice 

connection is already in 

use by another receiver.

Wait until the connection 

is free and then call the 

sender again.

The unit does not 

report an alarm.

Alarm source is not 

selected.

Select possible alarm 

sources on the Alarm 

sources configuration 

page.

No alarm response 

specified.

Specify the desired alarm 

response on the Alarm 

connections 

configuration page; if 

necessary change the IP 

address.

Control of cameras 

or other units is not 

possible.

The cable connection 

between the serial 

interface and the 

connected unit is not 

correct.

Check all cable 

connections and ensure 

all plugs are properly 

fitted.

The interface parameters 

do not match those of the 

other unit connected.

Make sure that the 

settings of all units 

involved are compatible.