Cisco Systems 10.0(1) Benutzerhandbuch

d) To update an existing phone, locate the appropriate phone and continue with

Step 5, on page 622

Step 3

Perform one of the following tasks when you choose the phone model:

a) From the Phone Type drop-down list box, select the appropriate phone type or device and click Next.

After you choose a phone type, you cannot modify it.

b) Select the Phone Template radio button, select the appropriate phone template from the drop-down list

box, and click Next. (Only phone templates that were created in the Bulk Administration Tool display in
the drop-down list box.)

Step 4

If the Select the device protocol drop-down list box displays, choose the appropriate protocol of the device
and click Next. Otherwise, continue with

Step 5, on page 622

The Phone Configuration window displays.

Step 5

Enter the appropriate settings as described in

Table 95: Phone Settings, on page 583

Only the settings that are appropriate to the chosen phone type display in the window.

Step 6

Click Save.
If you are adding a phone, a message displays that states that the phone has been added to the database. To
add a directory number to this phone, click one of the line links, such as Line [1] - Add a new DN, in the
Association Information pane that displays on the left side of the window. Continue to configure the directory
number settings.

If you are updating a phone, a message displays that states that you must click the Apply Config button for
your changes to take effect and synchronize the phone.

What to Do Next

You can continue to configure the following on the phone:

• speed-dial buttons

• services

• service URL buttons

• busy lamp field/speed-dial settings

Gateway Setup , on page 465

Cisco Unified IP Phone Setup , on page 579

BLF Speed Dial Setup , on page 620

Synchronize Phone , on page 625

Set Up Speed-dial Buttons or Abbreviated Dialing , on page 625

Set Up IP Phone Services , on page 626