Raymarine Chartplotter RL70CRC PLUS Benutzerhandbuch

Chapter 5: Standard Chart Operations

5-33

Going T

o 

an 

Indi

vi

du

al

 T

ar

ge

t 

Po

in

t

➤ Once you are following a route, you can advance to the next waypoint, even if 

you have not reached the current target waypoint:

1. If necessary, press the GOTO default soft key to display the Goto/Follow 

soft keys.

            

2. Press the WAYPOINT ADVANCE soft key. The current leg of the route is aban-

doned and the next waypoint becomes the target. The display is updated to 
show the new route leg. 

While you are following a route, or going to a target point, you can restart the 
XTE. This sets the XTE to zero and moves the origin to the actual vessel 
position. 

Restarting XTE is useful if you find yourself off track and want to go straight 
to your target, rather than get back onto the original track.

➤ To restart XTE:

1. Press the GOTO default soft key, the Follow/Goto soft keys are displayed. 

2. Press the RESTART XTE soft key. The route origin moves to the current vessel 

position, thus the XTE becomes zero.

Rather than following a route, you can go directly to a selected target point, 
this can be an existing waypoint (not in the current route), or the cursor 
position.

➤ To navigate directly to an existing waypoint:

1. Use the trackpad to position the cursor over the required waypoint until the 

letters WPT and the waypoint soft keys are displayed.

            

Alternatively, you can select the waypoint from the waypoint list as described 
in Section 5.3.

GOTO

D4172-1

RESTART

XTE

WAYPOINT

ADVANCE

GOTO

CURSOR

STOP

FOLLOW

WAYPOINT

ADVANCE

GOTO

RESTART

XTE

WPT

D4163-1

GOTO

WAYPOINT

EDIT

WAYPOINT

ERASE

WAYPOINT

MOVE

WAYPOINT