Raymarine Combined Pathfinder Radar Benutzerhandbuch
Appendix B: Using the Auxiliary Junction Box
B-3
Raysta
r 112, 105,
Ape
lc
o 182
and
18
2XT
Autohelm GPS, Z260 and Z273
To connect your GPS to your
hsb
2
display connect the wires as shown in the
first illustration below.
To connect your Differential Beacon Receiver, you must cut off the 5-pin
connector (Raytheon and Apelco versions) strip back the insulation on all the
wires and connect to the Auxiliary Junction Box as shown in the second
illustration below.
connector (Raytheon and Apelco versions) strip back the insulation on all the
wires and connect to the Auxiliary Junction Box as shown in the second
illustration below.
CAUTION:
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
Ensure the correct polarity of the 12 V supply before applying display or
SeaTalk power. It is recommended that a multimeter is used to check the
connections.
12V
Power
Supply
(fused)
Power
Supply
(fused)
From
GPS
sensor
GPS
sensor
Yellow
Green
White
Brown
Brown
Red
Black
To Display Unit
SeaTalk Socket
SeaTalk Socket
D4297-3
Red
Black
12V
Power
Supply
(fused)
Power
Supply
(fused)
From
GPS
sensor
GPS
sensor
Yellow
White
Green
White
Green
Red
Black
Green
Yellow
White
Brown
Yellow
White
Brown
Red
Black
To Display Unit
SeaTalk Socket
SeaTalk Socket
D4298-3
From
the
DBR
the
DBR
Red
Black