Planar EP5804K/EP5804K-T Benutzerhandbuch

Touchscreen MultiTouch Driver Installation

EP5804K, EP5804K-T, EP6504K and EP6504K-T User Manual

65

With the PC on, plug in the USB memory stick to the USB drive.

Locate and open the USB drive.

Double-click on the “mt_driver_kit [xxxxxx].exe” to install the driver.

Follow installation prompts until driver installation is complete.

Once driver installation is complete, the touchscreen is ready for use.

The PQLabs Software is used for troubleshooting and calibration. The different 
menus are described below.

On the PC, select the Start menu, All Programs and then PQLabs Software.

Click on “MultiTouch Platform” to open the PQLabs MultiTouch Platform window.

• Serial Number – Displays the serial number of the connected touchscreen.

• Firmware Version – Displays the firmware version of the touchscreen selected 

under the “Serial Number” dropdown menu.

• Touch Points – Displays the number of touch points for which the touchscreen 

is capable.

• Status – Displays the current status of the touchscreen.

• Calibration – Starts a 4-point calibration of the touchscreen. Perform the 

programmed touchscreen calibration process. At the conclusion of the 
calibration routine your touchscreen device is ready to use and will perform 
with accurately positioned touch points.

• Reset Calibration – Resets calibration to factory default settings.

• Diagnose – Starts the “MultiTouchDoctor” program. This can be used to 

troubleshoot issues with the touchscreen.

• Default settings on options have the following programs enabled: 

Tuio Support, Flash Tuio Support, Handwriting Optimization, Enable Windows 
Native Touch, Enable Mouse/Keyboard Simulation, and Launch When Windows 
Starts Up.

• Flexible Scan Rate is at a default setting.