Plantronics 50-0230B-004 Benutzerhandbuch

                                                                                                3

                                    
         

I. PREPARATION OF VEHICLE INTERIOR 

 

 
 
1.  Remove the O.E.M. console mounted to inner 

roof of vehicle. Remove and discard (1) one 
screw from recess in front of console near rear 
view mirror. Disconnect wire harness and 
remove console from vehicle. Use care not to 
damage A/C control head.      See Figure 1. 

 
 
 
 

 
 
 
 
 

2.  Remove A/C control head from cloth covered 

trim ring on O.E M. console by depressing (4) 
four tabs on back of control assembly.               
See Figure 2. Discard cloth covered trim ring.                                                                                          

 
 
 
 
 
 
 
 
 

 
 

3.  Remove and discard  O.E.M. dome light by 

removing  center cover and (2) two screws. 
Disconnect wire harness. See Figure 3. 

4.  Carefully remove and retain bezel from rear 

A/C control head and lay it in a safe place. 
See Fig. 3. 

5.  Remove and retain rear A/C control head and 

lay it in a safe place. See Figure 3. 
 

 

 

 

 

FIGURE 1 

FIGURE 2 

FIGURE 3