Samsung 192MP Benutzerhandbuch

If the vertical resolution is set to 85Hz, you can still see the display but the warning message below 
appears and disappears after one minute. Since the monitor does not support a vertical resolution that is 
85Hz or higher, the monitor goes into “ Not Supported Mode ” and the screen becomes blank after one 
minute.  
The user must adjust the frequency within that one minute.  
 

 

 
If the resolution is set to UXGA (1600x1200 60Hz), the same warning message as above appears and 
disappears after one minute, but the display still works properly. (Down-Scaling)  
 

 

Display adapter refers to the computer video card driver.  
If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot install 
the monitor driver.

1. Checking Adapter Driver 

Click Start 

 Settings 

 Control Panel 

 Display 

 Settings 

 Advanced 

 

Adapter. 
If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly 
installed. Install the adapter driver again according to the information provided by the computer or 
video card manufacturers. 
 

2. Installing Adapter Driver 

The instructions given below are for general circumstances.  
For specific issues, contact the relevant computer or video card manufacturers.

1) Click Start 

 Settings 

 Control Panel 

 Display 

 Settings 

 Advanced 

 

Adapter 

 Update Driver 

 Next 

 Display a list of the known drivers for this device so 

that I can choose a specific driver 

 Next 

 Have Disk (Insert Video Card Driver diskette) 

 OK 

 Next 

 Next 

 Finish.

2) In case you have Adapter Driver Setup file on your computer:  

Run Setup.exe or Install.exe, which is found in the Adapter Driver Setup file.

1. Maintaining the Monitor Case. 

Clean with a soft cloth after disconnecting the power cord. 

2. Maintaining the Flat Panel Display Screen. 

Clean with a soft cloth (cotton flannel) smoothly. 

z

Do not use benzene, thinner or other flammable substances, or a 
wet cloth.  

z

We recommend a Samsung cleansing agent is used to prevent 
damage to the screen.  

z

Never use acetone, benzene or thinner. 
(They may cause flaws or deformation of the screen surface.)  

z

The user will be required to pay costs and related expenses for 
repair of damages caused by him/her.