JVC KW-AVX846 Benutzerhandbuch

39

 

 Setting menu items

•  You cannot change <Audio> settings (except <Amplifier Gain>) when the AV source is turned off. 

Initial: Underlined

Fader : Adjust the front and rear speaker output balance.

♦

 F6 to R6; Initial 0

•  When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.

♦

 L6 to R6; Initial 0

Press [ 5/∞/2/3 ] or drag [ 

 ] to adjust.

•  To clear the adjustment, press [Center].

Change the sound mode or adjust and store the equalization for each source. 
(

☞ page 32)

♦

 Flat/Natural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User

You can activate/deactivate the loudness function.

♦

 Off

♦

 On

: Cancels.
:  Boost low and high frequencies to produce a well-

balanced sound at a low volume level.

Adjust the cross over frequency. (

☞ page 33)

Adjust and store the auto-adjustment volume level for each source. (For 
discs, the adjustment is stored for each of the following categories: DVD/
DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume 
level will automatically increase or decrease when you change the source.

♦

 –15 to +06; Initial 00

You can change the maximum volume level of this unit.

♦

 High

:  VOL 00 to 50

♦

 Low

:  VOL 00 to 30

(Select this if the peak power of the speakers is less 
than 50 W.)

♦

 Off

:  Deactivates the built-in amplifier.

•  If you change this setting from <High>/<Off> to <Low> while the 

volume level is set higher than the maximum level of <Low>, the unit 
automatically lowers the volume level to “VOL 30”.

*

  You can change the setting only when the AV source is turned off.

winauto.ua