JVC LVT1627-001A Benutzerhandbuch

•  Bluetooth device does not detect the 

unit.

This unit can be connected with one Bluetooth 
cellular phone and one Bluetooth audio device at a 
time. While connecting a device, this unit cannot 
be detected from another device. Disconnect 
currently connected device and search again.

•  The unit does not detect the Bluetooth 

device.

•  Check the Bluetooth setting of the device.
•  Search from the Bluetooth device. After the 

device detects the unit, select Open on the unit 
to connect the device. (☞ [84])

•  The unit does not make pairing with 

the Bluetooth device.

•  Enter the same PIN code for both the unit and 

target device.

•  Select the device name from Special Device, 

then try to connect again. (☞ [84])

•  Echo or noise occurs.

Adjust the microphone unit position.

•  Phone sound quality is poor.

•  Place the Bluetooth audio device nearer to the 

adapter.

•  Move the car to place where you can get a better 

signal reception.

•  The sound is interrupted or skipped 

during playback of a Bluetooth audio 
device.

•  Place the Bluetooth audio device nearer to the 

adapter.

•  Disconnect the device connected for “Bluetooth 

Phone.”

•  Turn off, then turn on the unit.
•  (When the sound is not yet restored,) connect 

the device again.

•  The connected audio device cannot be 

controlled.

Check whether the connected audio device 
supports AVRCP (Audio Video Remote Control 
Profile).

KDNX5000_J.indb   115

KDNX5000_J.indb   115

23/1/07   7:01:22 pm

23/1/07   7:01:22 pm