JVC KD-ADV49 Benutzerhandbuch

58

ENGLISH

Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (00).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only
• Rightmost—right only

Adjust and store auto-adjustment volume level for each source, comparing to 
the FM volume level. The volume level will automatically increase or decrease 
when you change the source.
–12 to +12; Initial 00
•  For digital sources: You can make the adjustments separately depending on 

the audio format—Dolby Digital/DTS and the others.

*1

Adjust the subwoofer output level. 
–06 to +08; Initial 00

Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.

Adjust the crossover frequency between the front/rear speakers and the 
subwoofer.
80Hz, 120Hz, 150Hz

You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low Power: Select this if the maximum power of the speakers is less than 
50 W.
High Power

*2

You can activate/deactivate the rear speakers.
Off, On

*3

Select to deactivate the surround function.

Select to activate the surround function. 

 [23]

Auto, Through, Dolby PL

II Movie, Dolby PLII Music

•  When you select <Dolby PL

II Music>, you can adjust <Panorama> and 

<Center Width>.

*4

Adjusts fader

Adjust balance

EN_KD-ADV49AVX44[JC]ff.indb   58

08.1.18   8:10:31 PM