Tyco Electronics 1525l Benutzerhandbuch

 

 135

Removing the Drivers (W95/98/ME) 
 

 

 
Complete removal of the drivers requires two steps: (1) remove the drivers from the system 
using the Device Manager and (2) remove the driver files manually after all devices have been 
removed by the Device Manager. 
 
To remove the drivers, follow these steps: 
 
1.  Stop any applications that are using the drivers.  This will insure that all of the ports that are 

going to be removed are closed. 

2. Right-click on My Computer on the desktop or open the Control Panel and double click on 

the System icon then select Properties. 

3. Select the Device Manager tab and click on the plus sign at MagTek. 
4.  Select the device under the MagTek group and click on Remove.  Then click OK.  After all 

device drivers have been removed in this manner, go to step 5. 

5.  Using Explorer or some other file manager, remove the following driver VXDs from  

C:\Windows\System: 

 

The driver files may be removed only if no drivers are currently installed that require 
them.  In particular, the class driver (MAG-TEKCL.VXD) must remain if any device 
type is still installed.  The driver files may be removed when all devices of that particular 
type have been removed. 

6.  Remove the support files from C:\Windows\System\.  The support files are: