Advantech IPPC-9151 Series Benutzerhandbuch

The IPPC-9151series  is equipped with a high performance 32-bit Ether-
net chipset, which is fully compliant with IEEE 802.3 100 Mbps CSMA/
CD standards. It is supported by major network operating systems, and is 
also both 100Base-T and 10Base-T compatible. 
The Ethernet port provides a standard RJ-45 jack. The network boot fea-
ture can be utilized by incorporating the boot ROM image files for the 
appropriate network operating system. The boot ROM BIOS files are 
combined with system BIOS, which can be enabled/disabled in the BIOS 
setup.

Before installing the Ethernet driver, note the procedures below. You 
must know which operating system you are using in your IPPC-9151, and 
then refer to the corresponding installation flow chart. Then just follow 
the steps described in the flow chart. You will quickly and successfully 
complete the installation, even if you are not familiar with instructions for 
Windows.
Important: The following Windows illustrations are examples only. You 
must follow the flow chart instructions and pay attention to the instruc-
tions which then appear on your screen.