Advantech IPPC-9151 Series Benutzerhandbuch

Seite von 114
47
Appendix 8  
•  Visible light transmission: 75% typical (>74% @ 550 nm test)
•  Clarity: Clear Finish - 25%, Antiglare Finish - 15%
Sensor  board
•  Chemical strengthened glass with 4 H hardness standard.
(Test condition: ASTM D3363-92A)
Ball  drop  test
•  Able to bear a 225 g steel ball dropped from 660 mm elevation without 
breaking
Environmental Specifications
•  Operating Temperature Range: -20°  C ~ +50° C, 2 weeks at 50° C / 
90% RH.
•  Storage Temperature High: +70° C, 240 hours at ambient humidity.
•  Storage Temperature Low: -40° C, continuous at ambient humidity.
•  Accelerated Aging: 100 hours at 60° C / 95% RH.
•  Thermal Shock: 25 cycles (one cycle is 30 min. dwell alternating from 
-40 to +85° C with less than 10 min. transfer time.
8.3  Installing Driver for Windows 2000/XP
The touchscreen has drivers for Windows 2000 and Windows XP. You 
should read the instructions in this chapter carefully before you attempt 
installation. 
Before installing the Windows 2000/XP driver software, you must have 
the Windows 2000/XP system installed and running on your computer. 
Note 1: 
The following windows illustrations are examples 
only. You must follow the flow chart instructions 
and pay attention to the instructions which then 
appear on your screen.
Note 2:
Install the HMI CD Driver into the system 
CD-ROM (D:\ means CD-ROM)