RedMax BCZ2650T Benutzerhandbuch
US-9
BCZ2650S/T/SS
U
S
6. Set up
Tighten the screws gradually by turns.
■ INSTALLING HANDLE
• Mount the handle to the shaft tube and
• Mount the handle to the shaft tube and
clamp it at a location that is comfortable
to you. (SE1)
to you. (SE1)
(1) About 19 inches (48cm)
■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box,
• Put the debris guard on the gear box,
attach it with the screws and hardware
provided. (SE2)
provided. (SE2)
■ INSTALLING LINE HEAD (SE3)
1. While locking the gear shaft, by
1. While locking the gear shaft, by
inserting the supplied tool into the
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
2. Fit the line head assembly to the gear
shaft over the holders. Hand-tighten it
securely.
securely.
• You need not holder (B) and nut when
installing the line head.
• Do not attach any metal blade to
BCZ2650T/BCZ2650SS.
IMPORTANT
IMPORTANT
SE1
SE3
(1)
SE2