Country Home Products TLC18-CHP Benutzerhandbuch

•  Check oil level before starting the engine. 
•  Check level daily, or after every eight hours. 
•  Keep oil level at FULL. 
•  Do not overfill. 

 
Oil filling procedure:  first add 1 quart.  Start and run engine at idle for 30 seconds.  Shut 
engine off and wait 30 seconds.  Then add more oil slowly to bring level to Full mark on dipstick. 
 
Oil checking procedure:  before starting engine, check oil level. 

•  Place engine level.  Clean around oil fill and dipstick. 
•  Remove dipstick and wipe clean with cloth. 
•  Push dipstick back in and remove to check oil level. 
•  Remove oil fill cap.  Pour oil slowly. 
•  Fill to Full line on dipstick – recheck. 
•  Replace dipstick firmly. 

 
 

•  Use clean, fresh, regular unleaded gasoline with a minimum of 85 octane.  Fresh fuel 

prevents gum from forming in the fuel system or on essential carburetor parts.  Purchase 
fuel in quantity that can be used within 30 days. 

•  Do not use gasoline which contains Methanol. 
•  Do not mix oil with gasoline. 

 

CAUTION:  Some fuels, called oxygenated or reformulated 

gasoline, are gasoline blended with alcohols or ethers.  Excessive 

amounts of these blends can damage the fuel system or cause 

performance problems.  If any undesirable operating symptoms 
occur, use gasoline with a lower percentage of alcohol or ether. 

 
ADDING FUEL 

•  Turn engine OFF and let engine cool at least 2 minutes before removing gas cap. 
•  Fill tank outdoors or in a well-ventilated area. 
•  Keep gasoline away from sparks, open flames, pilot lights, heat, and other ignition 

sources. 

•  Remove cap.  Fill tank to approximately 1 ½ inches below top of neck to allow for fuel 

expansion.  Be careful not to overfill. 

•  Replace cap before starting. 
•  If fuel spills, wait until it evaporates before starting engine. 

 

16