Bolens 462 Thru 465 Servicehandbuch

Seite von 16
 
 4
 
SECTION 2:  SAFETY LABELS FOUND ON YOUR UNIT:
DANGER
TO AVOID SERIOUS INJURY:
• 
DO NOT DEPOSIT BRANCHES LARGER THAN 1/2 INCH DIAMETER INTO THIS HOPPER.
• 
WEAR APPROVED SAFETY GLASSES, GLOVES AND EAR PROTECTION.
   
AVOID LOOSE FITTING CLOTHING.
• 
Read the Owner's Manual before starting and using this chipper/shredder.
 Keep hands, feet, face and clothing out of shredder hopper inlet and chipper chute inlet.
• 
Keep hands, feet, face and clothing away from discharge area and moving parts.
• Keep hands and feet out of discharge opening when chipper/shredder is running. The 
      
rotating cutting blades inside opening will cause serious personal injury.
• Do not transport unit with engine running.
• 
Keep bystanders, children, and pets away from operating and discharge 
WARNING
TO AVOID A FIRE HAZARD, KEEP LEAVES, GRASS, AND OTHER COMBUSTIBLE
MATERIALS AWAY FROM HOT ENGINE AND MUFFLER.
• If chipper/shredder jams or becomes clogged, shut engine off right away and wait for
   all moving parts to come to a complete stop. Disconnect the spark plug wire and prevent 
   it from touching the spark plug. Use only a long wooden stick (or long-handled shovel) to 
   clear away discharged materials or blockages.
• Keep all shields and guards in place and securely attached.
• DO NOT use hands or feet to clear material from the discharge area or discharge opening.
• DO NOT install parts, or remove, adjust, or service the discharge screen or any other part while
   the chipper/shredder is running. DO NOT operate the chipper/shredder on uneven ground, or on a 
   paved, gravel, or hard surface. DO NOT run engine in an enclosed area-exhaust gas contains 
   poisonous carbon monoxide fumes.
AC
0158A
WARNING:   DO NOT OPERATE
THIS MACHINE UNLESS THE
CHUTE DEFLECTOR HAS BEEN
PROPERLY INSTALLED AND  IS
SECURED WITH  THE  HAND
KNOBS.
ROTATING CUTTING BLADES.
KEEP HANDS AND FEET  OUT
OF OPENING WHILE MACHINE
IS RUNNING.
9342  AC
DANGER
!
WARNING
TO AVOID A FIRE HAZARD, KEEP LEAVES, GRASS, AND OTHER COMBUSTIBLE
MATERIALS AWAY FROM HOT ENGINE AND MUFFLER.
• If chipper/shredder jams or becomes clogged, shut engine off right away and wait for
   all moving parts to come to a complete stop. Disconnect the spark plug wire and prevent 
   it from touching the spark plug. Use only a long wooden stick (or long-handled shovel) to 
   clear away discharged materials or blockages.
• Keep all shields and guards in place and securely attached.
• DO NOT use hands or feet to clear material from the discharge area or discharge opening.
• DO NOT install parts, or remove, adjust, or service the discharge screen or any other part while
   the chipper/shredder is running. DO NOT operate the chipper/shredder on uneven ground, or on a 
   paved, gravel, or hard surface. DO NOT run engine in an enclosed area-exhaust gas contains 
   poisonous carbon monoxide fumes.
AC
0158A