Cub Cadet cs3310 Benutzerhandbuch

• 

Clean the chipper shredder thoroughly after each use.

• 

Wash bag periodically with water. Allow to dry thoroughly 

in shade.

• 

If the reduction chamber becomes clogged, remove and 

clean as instructed below.
NOTE: Cleaning with a forceful spray of water is not 

recommended as it could contaminate the fuel system.

Refer to the Maintenance section of the Engine Operator’s 

manual packed with your unit. Read and follow instructions 

carefully.
• 

Check engine oil level before each use as instructed in the 

separate engine manual.

• 

Clean or replace air cleaner every 25 hours under normal 

conditions. Clean every few hours under extremely dusty 

conditions. To service the air cleaner, refer to the engine 

manual.

• 

The spark plug should be cleaned and the gap reset once 

a season. Check engine manual for correct plug type and 

gap specifications.

• 

Clean engine regularly with a cloth or brush. Keep the 

top of the engine clean to permit proper air circulation. 

Remove all grass, dirt, and combustible debris from muffler 

area.

• 

Always observe safety rules when performing any 

maintenance.

• 

The warranty on this chipper shredder does not cover 

items that have been subjected to operator abuse or 

negligence. To receive full value from warranty, operator 

must maintain the equipment as instructed here.

• 

Changing of engine-governed speed will void engine 

warranty.

• 

All adjustments should be checked at least once each 

season.

• 

Periodically check all fasteners and make sure these are 

tight.

Always stop engine, disconnect spark 

plug, and ground against engine before, cleaning, 

lubricating, or performing any type of maintenance 

on your machine.

1. 

Lubricate the chipper chute hinge a with light oil once a 

season.

2. 

Lubricate the pivot points on the chute deflector with light 

oil once a season.

3. 

Follow the separate engine manual packed with your unit 

for engine lubrication instructions.