Broan RMDD3004 Merkblatt

Seite von 2
SPECIFICATION SHEET
 
REFERENCE QTY. 
REMARKS 
Project
  
 
 
Location
  
 
 
Architect
  
 
 
Engineer
  
 
 
Contractor
 
 
 
 
Submitted by 
 
Date
Exhaust your cooktop without the use of an
overhead hood. Compact design is installed directly 
behind cooktop.
FEATURES
HOUSING:
• 
Rugged steel construction
• 
S
ilver paint and/or glavanized finish
• 
Space-saving - can be used with most cooktops on the 
market
• 
 
30", 36", or 48" widths - Fits standard-size cabinets
• 
 
For indoor use only
BLOWER:
• 
 
Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal blower 
wheel for quiet, efficient performance
• 
 
Permanently lubricated, thermally-protected motor
• 
 
Neoprene, resilient anti-vibration mounts
• 
 
Unit plugs directly into 120 VAC, 60 HZ, grounded outlet
• 
 
Uses standard 3-1/4" x 10" duct connector
  
• 
 
3-position discharge - scroll box moveable to adjust to 
floor joists
CHIMNEY ASSEMBLY:
• 
 
Brushed stainless steel cover - just press button to turn 
unit "ON"
• 
 
Chimney rises 9½" when activated - ideal for large pots 
and pans
• 
 
Stylish, stainless steel filters with aluminum mesh - easy 
to remove and dishwasher-safe
• 
 
Stainless steel chimney front and back - makes cleanup 
quick and easy
• 
 
Flush-mounted, infinite rotary speed blower control
• 
 
Heat Sentry
TM
 adjusts speed of blower to HIGH in case 
of excess heat
• 
 
Conveniently located button - press to lower air vent and 
turn unit "OFF"
• 
 
OPTIONAL Remote Control (Model RMDDRBK) activates 
downdraft from alternate location
TYPICAL SPECIFICATION
Downdraft blower system shall be Rangemaster
®
 Model 
RMDD3004 (RMDD3604) (RMDD4804).
Unit shall be for indoor use only.
Unit to have steel housing with silver paint or galvanized 
finish. Air vent to rise at least 9½" and have a stainless steel 
front and back for ease of cleaning.
Filters to be stainless steel with aluminum mesh, easy to 
remove and dishwasher-safe.
Blower will connect directly to 3¼" x 10" rectangular duct 
(6" round duct using a transition). Blower discharge to be 
convertible to accommodate ductwork from LEFT, RIGHT, 
or BELOW and have 7½" side-to-side adjustment.
Motor shall be mounted to blower assembly with grease 
resistant anti-vibration mounts, be removable,  and lifetime 
lubricated.
Unit to include Heat Sentry
TM
, to adjust blower speed to HIGH 
in case of excess heat and must accept an optional remote 
control activation button.
Downdraft system shall operate on 120 VAC and be able to 
be plugged into a standard grounded outlet. It will have an 
infinite speed blower control.
Air delivery shall be no less than 500 CFM. Air delivery rat-
ing shall be certified by HVI. Downdraft blower system to be 
U.L. listed.
 
SPECIFICATIONS
 VOLTS 
HZ 
AMPS 
CFM 
DUCT
  120 
60 
4.0 
500 
3-1/4" x 10"
MODELS RMDD3004, RMDD3604, 
RMDD4804 
 DOWNDRAFT
21L 99043189E
HVI2100 CERTIFIED RATINGS comply with new testing 
technologies and procedures prescribed by the Home 
Ventilating Institute, for off-the-shelf products, as they 
are available to consumers. Product performance is rated 
at 0.1 in. static pressure, based on tests conducted in 
a state-of-the-art test laboratory. Sones are a measure 
of humanly-perceived loudness, based on laboratory 
measurements.
Broan-NuTone LLC    Hartford, Wisconsin    www.broan.com    800-558-1711
Broan-NuTone Canada, Inc.    Mississauga, Ontario    www.broan.ca    877-896-1119