Troy-Bilt 070 Benutzerhandbuch

Drive Control

Speed Control

Upper Handle

Bag

Hose 

Assembly

Blower Chute

Carriage 

Screws

Upper Hose 

Handle Bracket

Rope Guide

Handle Knobs

Wing Nut

Cable Guide

Bottle of Engine Oil

Operator’s Manual

Safety Glasses

Lower Hose 

Handle Bracket

Lower Handle

Wing Nuts

IMPORTANT: This unit is shipped without gasoline or oil 
in the engine. Be certain to service engine with gasoline 
and oil as instructed in the separate engine manual 
before operating your machine.

NOTE: Reference to right and left hand side of the Yard 
Vacuum is observed from the operating position.

1.  Cut each corner of the carton vertically from top to 

bottom. 

2.  Remove all loose parts.
3.  Remove loose packing material.

1.  Lift unit from the rear to detach it from underlying 

carton material and roll unit out of carton.

2.  Check carton thoroughly for any other loose parts.

NOTE: Make sure not to crimp cables while removing 
loose parts or the entire unit from the carton.

a.  Upper and Lower Handle
b.  Hose Assembly
c.  Safety Glasses
d.  Engine Oil (May be located in bag)
e.  Bag
f.  Blower Chute (If Equipped)
g.  Operator’s Manual

NOTE: Reference to 
right and left hand side 
of the Yard Vacuum 
is observed from the 
operating position.

This unit is shipped 

without gasoline or 

oil in the engine. Be 

certain to service 

engine with gasoline 

and oil as instructed 

in the separate engine 

manual before operat-

ing your machine.