Troy-Bilt 204 Benutzerhandbuch

IMPORTANT: This unit is shipped without gasoline or oil 
in the engine. Be certain to service engine with gasoline 
and oil as instructed in the separate engine manual 
before operating your machine.

1.  Following is the list of loose parts shipped with your 

equipment. Compare the parts with the illustration in 
Figure 3-1 to identify these items.
a.  Nozzle
b.  Bag
c.  Chipper Chute
d.  Engine Oil (May be located in bag)
e.  Safety Glasses
f.  Tamper Plug (If Equipped)

NOTE: All references in this manual to the left or right 
side of the yard vacuum is from the operating position 
only. Exceptions, if any, will be specified.

2.  a. Remove three wing nuts from the front of the 

chipper shredder vacuum. See Figure 3-2.

  b. Place nozzle in position over three studs on unit.
  c.  Secure with wing nuts just removed. See Figure 

3-2.

NOTE: The metal tab on the nozzle must depress the 
safety switch button attached to the front of the chipper 
shredder vacuum or engine will not start. See Figure 3-2.

3.  Loosen, but do not remove, the two hex bolts, flat 

washers, and flange nuts which are secured to the 
support bracket. See Figure 3-3.

NOTE: All references 
in this manual to the 
left or right side of 
the chipper shredder 
vacuum is from the 
operating position only. 
Exceptions, if any, will 
be specified.

This unit is shipped 

without gasoline or 

oil in the engine. Be 

certain to service 

engine with gasoline 

and oil as instructed 

in the separate engine 

manual before operat-

ing your machine.

NOTE: The metal tab 
on the nozzle must 
depress the safety 
switch button attached 
to the front of the chip-
per shredder vacuum 
or the engine will not 
start.

Chipper 

Chute

Tamper 

Plug

Safety Glasses

Bottle of Oil

Nozzle

Bag

A

B

C