Snapper R196019B Benutzerhandbuch
Safety Instructions & Operator’s Manual for
19” STEEL DECK
WALK MOWERS
SERIES 19
MODEL
R196019B
MODEL NUMBER EXPLANATION
R 19 60 19 B
MODEL DESIGNATION
ENGINE TYPE
CUTTING WIDTH
SERIES DESIGNATION
ENGINE POWER *
R – Recycling Model
60 – 6.0 (Engine Power *)
B – Briggs & Stratton Engine
19 – 19” Cutting Width
19 – Series Designation
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense.
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating
Information’ on Page 4 for further information.
BRIGGS & STRATTON YARD POWER PRODUCTS GROUP
COPYRIGHT © 2007, BRIGGS & STRATTON CORPORATION
MILWAUKEE, WI, USA. ALL RIGHTS RESERVED.
COPYRIGHT © 2007, BRIGGS & STRATTON CORPORATION
MILWAUKEE, WI, USA. ALL RIGHTS RESERVED.
MANUAL No. 7101116 (I.R. 3/12/2007)
TP 100-5264-IR-WB-N