Snapper ELT145H33FBV Benutzerhandbuch

Seite von 40
 
16 
Section 3 - MAINTENANCE 
 
3.3.4. TRACTOR 
LUBRICATION 
(Continued From Previous Page) 
7.  Steering Tie Rod 
Lubricate both ends of steering tie rod with a small 
amount of 30 wt. motor oil from an oil can. See 
Figure 3.9. 
 
 
 
FIGURE 3.9 
 
8.  Blade Engagement Mechanism 
Using 30 wt. motor oil, lubricate the blade 
engagement mechanism pivot points, which are 
located on the R.H. underside of tractor. See Figure 
3.10. 
 
 
 
 
 
FIGURE 3.10 
 
9.  Park Brake Lever 
Using 30 wt. motor oil, lubricate the park brake lever 
mechanism pivot points, which are located on the left 
hand underside of tractor. See Figure 3.11. 
mechanism with a thin coat of 30 wt. motor oil. 
 
 
 
FIGURE 3.11 
 
10. 
Deck Lift Mechanism 
Lubricate all wear and pivot points of the deck lift 
 
3.4  ANNUALLY (END OF EACH SEASON) 
Perform all maintenance as described in Section, 
“SERVICE - EVERY 25 OPERATING HOURS”. Also 
see service schedule. 
3.4.1. ENGINE 
1.  
Service engine according to engine owner's 
manual. 
3.4.2. FUEL 
FILTER 
1.  Service fuel filter as instructed below, on COLD 
ENGINE ONLY! 
 
NOTE:  It may be necessary to drain the fuel tank before 
removing fuel filter to prevent spillage of gasoline. 
 
2.  Locate fuel filter. Remove hose clamps and fuel 
hoses from both sides of fuel filter. See Figure 3.12. 
 
 
FIGURE 3.12 
 
 
 
 
 
LUBRICATE 
BOTH ENDS 
OF TIE ROD 
LUBRICATE 
COMPONENTS ON 
UNDERSIDE OF 
TRACTOR 
BLADE 
ENGAGEMENT 
LEVER 
LUBRICATE COMPONENTS 
ON UNDERSIDE OF TRACTOR 
PARK BRAKE 
LEVER 
FUEL TANK 
FUEL FILTER 
REMOVE HOSE 
CLAMPS