Snapper LT180H48FBV2 Benutzerhandbuch

Section 2 - OPERATING INSTRUCTIONS

2.4 STOPPING

2.4.3. STOPPING MOWER BLADES
1. Stop mower blade by pushing blades switch IN to
disengage blades. See Figure 2.11.

FIGURE 2.11

WARNING

Once blades are disengaged, they should come to a
complete stop in 5 seconds or less. If the blades
continue to rotate after 5 seconds, the blade brake
must be repaired. Return machine to an authorized
SNAPPER dealer. DO NOT continue to operate
machine until blade brake has been repaired and
functioning properly.

2.4.4.  SETTING PARK BRAKE
1.  Fully depress clutch/brake pedal.
2.  Move park brake lever up into slot. See Figure 2.12.
3.  Release pedal.

FIGURE 2.12

2.4.5. RELEASING PARK BRAKE
1. Fully depress clutch/brake pedal. Move park brake
lever “DOWN” to release park brake. Release
clutch/brake pedal. See Figure 2.13.

FIGURE 2.13

2.5. CUTTING HEIGHT ADJUSTMENT

1. Depress lock button on cutting height adjustment
lever. See Figure 2.14.

FIGURE 2.14

2. Raise or lower deck to any of six positions as
desired.

WARNING

DO NOT park machine on slopes.

PUSH PEDAL ALL
THE WAY DOWN

PARK BRAKE
LEVER

MOVE PARK BRAKE
LEVER “UP” TO
ENGAGE PARK BRAKE

CUTTING
HEIGHT
ADJUSTMENT
LEVER

DEPRESS
LOCK BUTTON

HIGHEST CUT

LOWEST CUT

PULL BLADE
SWITCH OUT TO
THE “ON”
POSITION

PUSH BLADE SWITCH IN TO
THE “OFF” POSITION

OFF

CLUTCH/BRAKE
PEDAL

FULLY DEPRESS
CLUTCH/BRAKE
PEDAL

PARK
BRAKE
LEVER