Snapper LT160H42FBV2 Benutzerhandbuch

 

 

 

 
6.  Remove both hair pins and washers from swivel 

located on rear lift rods and pull rod out of deck 
brackets. 

7.  Rotate swivels on both sides up or down to 

achieve the proper levelness. See Figure 4.7. 

8.  Reinstall swivel into deck bracket. Reinstall 

washers and hair pins.  

9.  Tighten nut and bolt on front lift arm securely. 

 

 
 
 

 
 

 

Before making deck leveling adjustments, check the 
tire pressure. Add or release air as needed to bring 
pressure to 12 PSI in front and 12 PSI in rear tires. If 
tires are properly inflated and mowing is still uneven, 
check side-to-side deck levelness first then proceed 
to front to rear adjustment. Adjust front to rear deck 
levelness as follows: 

 
1.  Place machine on a smooth level surface. 
2.  Rotate outside blades so tips are pointed to the 
front and rear of deck. Measure the distance from 
blade tips to floor. The distance should be the same, or 
the rear 1/4” lower than the front.  If the rear blade tip is 
higher or is more than 1/4” lower than the front, 
proceed to next Step for adjustment.  
3.  Remove the hair pin & washer from swivel located 
on lift rod. Remove swivel/lift rod from hanger bracket. 
4.  Rotate swivel up or down to achieve the proper 
levelness.  
5.  Reinstall swivel/lift rod into hanger bracket. Reinstall 
washer & hair pin to secure swivel to hanger bracket. 
See Figure 4.7.