Snapper SPLH160BV Benutzerhandbuch

SECTION 2 - CONTROLS

Before operating, become familiar with all the
controls (See Figure 2.1A) and how to use them.
Know beforehand how to STOP the Right Hand
and Left Hand Traction Wheel Drives, the Mower
Blades, and the Engine in preparation for a
possible emergency.

2.1 ENGINE CONTROLS -

Engine Speed Control

Keyswitch

Operator’s Presence Control (OPC)

Engine Recoil Starter Handle (Not shown)

WARNING

When the Operator’s Presence Control (OPC) is
released, the machine will continue to operate a few
feet. DO NOT use this Operator’s Presence Control
(OPC) to routinely stop the machine.

2.2 BLADE AND TRACTION CONTROLS

Blade Clutch Control Switch

R.H. Steering Control

L.H. Steering Control

Neutral Latch Lever

Speed Control/Park Lock Lever

WARNING

Neutral Latch is not intended to be used as a park
brake. Never park machine on slopes.

IMPORTANT:

To roll the machine without the

engine running, turn both pressure relief valves
counter-clockwise 1/2 turn. Turn valves clockwise to
tighten for machine operation.

FIGURE 2.1B

FIGURE 2.1A

(2) RIGHT HAND
TRACTION
CONTROL

(4) NEUTRAL
LATCH LEVER

(B) KEY SWITCH

HANDLEBAR

(1) BLADE CLUTCH
CONTROL SWITCH

(3) LEFT HAND
TRACTION CONTROL

ENGINE SPEED CONTROL

(5) SPEED
CONTROL LEVER

VIEW OF CONTROL PANEL
(Rear of Machine) FROM
OPERATOR’S POSITION

(B) KEY SWITCH

PRESSURE RELIEF
VALVE

LEFT HAND
PUMP

PRESSURE RELIEF
VALVE

TO ROLL MACHINE,
TURN BOTH PRESSURE
RELIEF VALVES
COUNTER-CLOCKWISE
1/2 TURN

RIGHT
HAND
PUMP