Snapper 61 Cut Zero-Turn Riding Mower Benutzerhandbuch

Operation

See Figure 4.  The seat can be adjusted forward and 
backward.  Move the lever towards the left, position the 
seat as desired, and release the lever to lock the seat into 
position.

Tire pressure should be checked periodically, and 
maintained at the levels shown in the chart. Note that these 
pressures may differ slightly from the “Max Inflation” 
stamped on the side-wall of the tires. The pressures shown 
provide proper traction, improve cut quality, and extend tire 
life.

The cutting height adjustment pin (A, Figure 5) control 
the mower cutting height.  The cutting height is adjustable 
between 1-1/2” (3,8 cm) and 6” (15,2 cm) in 1/4” (0,64 cm) 
increments.

 1.  Depress the deck lift foot pedal (B) until it locks into the 

6” (15,2 cm) position.

 2.  Place the cutting height adjustment pin in the desired 

cutting height.

 3.  Depress the deck lift foot pedal then push the lock lever 

(C) toward the right to release the lock.

 4.  Release the deck lift foot pedal until it comes to rest 

against the cutting height adjustment pin.

psi

bar

Rear

15

1,03

All

Front

25

1,72

Models w/ Air Filled Tires

Front

N/A

Models w/ Flat-Free Tires

Not 

for  

Reproduction